How do I reset my MikroTik RouterBOARD 2011?

1. Download latest RouterOS v6 build and Netinstall: mikrotik.com/download.
2. leave Netinstall running in background.
3. connect etherboot cable to ether1, hold down reset button.
4. power on the unit, release reset button after ~10s.
5. check if you can see unit in Netinstall window.

How do I reset my MikroTik hex Poe?

1. unplug the device from power.
2. press and hold the button right after applying power. Note: hold the button until LED will start flashing.
3. release the button to clear configuration.

How do I reset my Haplite?

1. unplug the USB cable to power off.
2. hold the RES button with a pen.
3. plug power (keep holding button)
4. when ACT LED starts flashing, release button.
5. wait some 15-20 seconds and ACT LED will flash twice, it means process is finished.

How do I reset my CCR?

1. Power on MikroTik CCR.
2. Press the Reset button on the front side.
3. Router will make a beep sound, release the button and wait until CCR reboot and comes in factory reset mode.